[QUOTE=ahmed_dcc;554398]Hello everyone
want to help the code errors
Richo machine MPC 300 SC 995-001
Hy
did you change any board?
did you change nvram?
what happened.
[QUOTE=ahmed_dcc;554398]Hello everyone
want to help the code errors
Richo machine MPC 300 SC 995-001
Hy
did you change any board?
did you change nvram?
what happened.
[QUOTE=francisco;554500]1. In the beginning you change the entire main board then the problem occurred and the code 995-001 then you returned everything as it was in the first
2-then you change Nvram and put new serial code did not disappear and still the problem as it is
[QUOTE=ahmed_dcc;554504]the serial number is in eeprom (bicu board)
when you put a new nvram in the controler board,SC 995 will appear, you must turn off the machine(the serial number is automatic copy from eeprom to nvram)
when you turn on again the machine is ready.
the nvram must be a new one ,not one that was in another machine before
Thank you
But we have all of the above
Untitled.jpgUntitled1.jpg
haha...Agreed! Although I think he probably does have it, just apparently no IDEA or interest in how to use it, since the initial post simply asks for the meaning of an SC (in a giant font).
There's no background to indicate what led to the problem, which (not surprising) was entirely caused by him -and who knows what he's really done, because he only provides limited details- even when asked directly
1. Is it wrong I am asking you when people experience a significant mis or mis I asked for help in something wrong
2-Yes, I have not at the outset to clarify what happened inadvertently But when someone was asking me about what I did not deny mis committed and you list what happened to me
3-Do direct my question is mis or ridicule from others
4. Thank you to those who helped me both advised me of the fact, or ridiculed way ask questions about anything
5-very unfortunately that was the style of asking the question angers
I thank everyone the information they were so useful
Bookmarks