Ricoh MPC-2004SP - Human Detector Sensor Activation.

[nadimtopsecret]

Hello Everyone,
Hope you all are doing well.
Can anyone of you told me that, how to activate the "Human Detector Sensor on Ricoh MPC-2004SP" ?

[Brianneoe]

its already active, this feature does not wake up the display. When you walk up to the machine that is in a cold state the sensor will start to preheat the fuser to bring it up to a ready state faster.

Good luck

[nadimtopsecret]

Thanks for your kind information
But I just have the curiosity that, on one of our client's machine's when someone came and stand in front of the machine, it's automatically woke up. But this same machine on another customer site that doesn't happen. That's why I just curious !

[nick_nickless]

The operation of the proximity sensor can be switched off and on with a User Tool setting.

1. Touch "User Tools" on the operation panel.
2. Select System Settings > General Settings > Human Detection Sensor
3. You can switch the sensor off/on by selected Disabled/Enabled. The default setting is "Enabled".

There is one proximity sensor related SP code: SP5102-203 Auto Detect: human detection check. This is an on/off check.

• Enter "0" to switch the sensor off.
• Enter "1" to switch the sensor on.

This SP is used to check the operation of the sensor. It confirms that the sensor can be switched off and on normally. (Default: On).
This check can be used regardless of the User Tool setting. Even if the sensor is switched off with the User Tool setting, a check can be done with this SP code.