Thanks:
0
Dislikes:
0
-
-
Re: Ricoh MPC-2004SP - Human Detector Sensor Activation.
its already active, this feature does not wake up the display. When you walk up to the machine that is in a cold state the sensor will start to preheat the fuser to bring it up to a ready state faster.
Good luck
-
-
Re: Ricoh MPC-2004SP - Human Detector Sensor Activation.
The operation of the proximity sensor can be switched off and on with a User Tool setting.
1. Touch "User Tools" on the operation panel.
2. Select System Settings > General Settings > Human Detection Sensor
3. You can switch the sensor off/on by selected Disabled/Enabled. The default setting is "Enabled".
There is one proximity sensor related SP code: SP5102-203 Auto Detect: human detection check. This is an on/off check.
• Enter "0" to switch the sensor off.
• Enter "1" to switch the sensor on.
This SP is used to check the operation of the sensor. It confirms that the sensor can be switched off and on normally. (Default: On).
This check can be used regardless of the User Tool setting. Even if the sensor is switched off with the User Tool setting, a check can be done with this SP code.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks