Service code sc542 won't go away on ricoh mp 2510

[Djohnbaptiste]

Good day I have an mp2510 which started with a 546 code I believe at first which I was able to clear after doing some online research. I had to attempt to fix the problem myself because the only ricoh technician on the island where I lives discontinued support for ricoh in October of 2016. Anyway following online information I ordered some thermistors and changes them. By this time I had done to SC reset procedure 2 or three times in orded ro use the machine. At some point the code became SC 542 which won't clear. I also ordered and have on hand a fuser rebuild kit. Any suggestions? I desperately need this machine to work as I have a project due on the 24th.

[Zeldaman]

Hi there!
On these RUSSIAN-models it´s the best to change thermistors, hotroller, pressroller, bearings & cl-roller at once. Only changing 1 or 2 parts is a waste of time.
Greetings...

[Djohnbaptiste]

Hi there!
On these RUSSIAN-models it´s the best to change thermistors, hotroller, pressroller, bearings & cl-roller at once. Only changing 1 or 2 parts is a waste of time.
Greetings...

Well I have this service kit on hand Ricoh PM Kit. Part# PMB205120K.

I was a little overwhelmed by all the small parts but I am willing to try to install them.