we're going to try it,
In which operating system does it work?
requirements?
ventas.ricoh@gmail.com
hi kplow1986
appreciate if u can send me the program
milhyhsgnroh@hotmail.com
I'm also interested!
samassefa3201@gmail.com
Thanks!
hi tonermunkeh, I take this opportunity to ask something about sp 5-866 ... I tried on a 2003, I entered all the parameters following the guides of the various discussions here on the forum, only when I try with sp 5-866-112 ( test), it instantly returns "failed" the scan to mail works perfectly, you have some idea of what might be missing to make it work???...
Would suggest you look into a software solution such as printtracker meter reading software that can be emailed to customer or tech installed.
Much less wasted time service calls for meter reads or meter read problems.
I would like to have a copy.
junaid@saudi-imaging.com
Thanks,
im not yet get the copy
Everything can be set before cycling power. But as you mentioned it will not work until the power is cycled.
Not sure if the following is a repeat of what someone else has done but this is what I have our techs do:
1) Make sure email is setup and working.
2) SP5866-110, Change to a 1. Turns on the ability for e-mail counter notification
3) SP5866-121, Enter the To address (Use an address you can check first. If you get the email then use address it needs to goto)
a. SP5866-122 and 123 can be used for additional destinations
4) Reboot the machine
5) SP5866-114, Specify date to send email (0 is every day)
6) SP5866-115, Specify time to send (24 hour format, no leading 0, 9:00AM would be 900)
7) SP5866-112, Sends a test email after exiting system SP
Still takes going in a few times but has not failed me yet, as long as the copier can send e-mail.
Bookmarks