Mpc6502 large void band at trail edge.
I have enclosed an image for viewing. The image happened before fuser. I've replaced itb cleaning unit and still no improvement.IMG_2215.jpg
Mpc6502 large void band at trail edge.
I have enclosed an image for viewing. The image happened before fuser. I've replaced itb cleaning unit and still no improvement.IMG_2215.jpg
Is this a thick paper?
Sent from my GT-I9195I using Tapatalk
All regular 20lb paper
It appears to occur with all color's I would check transfer roller D1366240..........
So have you pulled the transfer unit apart and had a look.
My bet you be the large metal case that sits under the transfer unit on a angle has a seal on the end of it.
That seal has either come off or warped causing this.
Used to happen a lot of the ProC901
I forget to include the yellow and black images. It is doing on all 4 colors. I did pulled the itb apart last Friday and could not see any out of ordinary but I will recheck it again. Thank you impretik, polarbear, and Mikon and everyone for the advice. I will go back there today and recheck the itb as recommended.
Try with another fuser unit
Sent from my GT-I9195I using Tapatalk
If you don't see anything in the ITB,check the PTR.
Bookmarks