MPC 7500/7501 bypass

[Timmytronic]

Hi. I know it's an oldie but I have a bypass that won't feed and before I have to pull the controller out and have a strip down to look at the clutch has anyone has the same problem.?

feed tyres and clutch is new. I thought it maybe the feed shaft but not sure. It was fine of course but now just makes a big vibrating noise when feeding and feeds weakly. It does feed it you push the card or paper through but leaving it to its own devices it just goes in a little and stops.

Many help would be great.

Thanks people.

Tim.

[MIKON]

Something to check.
The feed roller is different than the paper trays
The 1 way bearing should be white.on the bypass...

[Timmytronic]

Something to check.
The feed roller is different than the paper trays
The 1 way bearing should be white.on the bypass...

Hi. Thank you I know that and made sure that it was the right one just in case.




Sent from my iPhone using Tapatalk