scan to email message

[tufbnme]

Sending from a mpc4503, the email subject is :Message from "host name"
Is there a way to change the default subject? (message from)

[sandmanmac]

Sure.
WIM / Scanner/ Send settings - at least that's where it is on previous models. I haven't worked on one of these yet.

Change from default (host name), to manual entry

[tufbnme]

Sure.
WIM / Scanner/ Send settings - at least that's where it is on previous models. I haven't worked on one of these yet.

Change from default (host name), to manual entry

That is where the host name is changed, I already know that. What I want to change is the part that says message from.

[sandmanmac]

That is where the host name is changed, I already know that. What I want to change is the part that says message from.

Wrong. The Host name is changed under IPV4 settings.

This is a screen shot from my MP301 where I suggested the setting was, with the "manual entry" changed to MP C4503
Host Name.jpg

[slimslob]

"Subject" button on the bottom of the scanner function screen.

[tufbnme]

It's different on the 4503

[slimslob]

It's different on the 4503

SOP?

[copier tech]

The "from" email address is the administrators address in the file transfer tab.

If you change the host name of the printer that will show as the "from" device.

Capture.JPG