Dislikes:
0
-
Technician
- Rep Power
- 19
Ricoh C3002 color off only when printing
20170410120627597.pdf
Copies fine but when try to print or use a thumb drive the colors are off, see attachments. Firmware is up to date, tried ACC and only on the print side the test patterns are off. Any ideas would be helpful.
-
Senior Tech
100+ Posts
- Rep Power
- 17
Re: Ricoh C3002 color off only when printing
Clean laser unit , also clean ITB unit transfer rollers
I don't belive the copies are fine, please print out a color test patern
Printer SP. 1103-002
Last edited by gkalman2004; 04-10-2017 at 08:04 PM.
-
Re: Ricoh C3002 color off only when printing
Has the machine ever had an NVRam or an "all clear" that you know of?
If you have the factory print out/birth certificate check all the SP settings are correct.
Also you are using genuine Ricoh toner & parts?
-
Technician
- Rep Power
- 15
Re: Ricoh C3002 color off only when printing
We looked into the Birth certificate and did find that every option was set to 0. But after changing them all to match the BC, the problem still hasn't changed.
What we have going on, the copies from the copier are un-affected. They appear fine. But when something is printed, from other the network or from a USB drive. We get a picture, with distorted colors and its as if shapes are outlined. (see images).
20170421135216496.pdf
We have done Auto calibrations to this unit and the Copier calibrations come out fine. But the prints calibrations seem to print the first light shades fine, but the shades through the middle are one solid color, and the darkest shades are fine. (see original posters upload).
Firmware has been updated. We have pulled the controller board out to check for loose connections or possible problems in that area.
Don't understand how we can get good copies and yet have this problem when printing. Is there something that is involved in the printing process from network and USB that is not involved in making copies?
-
Re: Ricoh C3002 color off only when printing
Looks like toner save is enabled in printer settings. Or print density is set to a lighter density, finer resolution, or photo instead of text/photo. I'd look around in the printer settings in the user tools.
-
Technician
- Rep Power
- 15
Re: Ricoh C3002 color off only when printing
Thanks for the reply, but no luck. Went to the printer settings and could not find anything off, tried changing some of the setting you suggested, but no change in problem.
-
Senior Tech
100+ Posts
- Rep Power
- 27
Re: Ricoh C3002 color off only when printing
Iam having same problem makes everything hologramish what i have noticed if i clear print memory via 5801 and do a color reg and not a auto color calibration prints look good im kind of confused on what the issue may be i was almost thinking nvram....
-
Technician
- Rep Power
- 15
Re: Ricoh C3002 color off only when printing
Yeah, we still have yet to narrow it down, but if we do, ill post what we find.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks