Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    648
    Rep Power
    42

    MPC 2051 Jams one or two times ONLY in the morning

    Hello

    Have an strange issue with an MPC 2051, the machine worked fine until a week ago, now the machine jams only in the morning, two or three times, once i remove the paper ( its right after the registry roller, it's not an no feed jam), the machine works fine until the evening. I checked the Feed motors and the registry motor (Ricoh replaced the feed/registry cluthes with motors), but there is nothing .....

    any ideas??
    Memento Audere Semper

  2. #2
    Service Manager 5,000+ Posts
    MPC 2051 Jams one or two times ONLY in the morning

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MPC 2051 Jams one or two times ONLY in the morning

    What are the jam codes?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  3. #3
    Field Supervisor 500+ Posts
    MPC 2051 Jams one or two times ONLY in the morning

    Elmo's Avatar
    Join Date
    Feb 2010
    Location
    up north
    Posts
    535
    Rep Power
    41

    Re: MPC 2051 Jams one or two times ONLY in the morning

    Had a similar problem with 1 only jammed on 1st or 2nd page when 1st used then would work ok all day
    until next morning when again would jam 1st use
    turned out to be the fuser unit
    I Used To Live To Fix Things Now i Fix Things To Live

  4. #4
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    940
    Rep Power
    47

    Re: MPC 2051 Jams one or two times ONLY in the morning

    Hi there!
    I agrre with Elmo, the fuser of this DIANA´s is a pain in the a.., but i had a similar problem on this type, and there it was the clutch D1051166. Worth a try.
    Greetings...

  5. #5
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    648
    Rep Power
    42

    Re: MPC 2051 Jams one or two times ONLY in the morning

    Hello... In my case the paper never reached the fuser unit... The customer find the jam right after the registry roller, but never inside the fusing unit.... Is it possible that the registry motor or the feed motor are defect??

    Inviato dal mio SM-G935F utilizzando Tapatalk
    Memento Audere Semper

  6. #6
    Field Supervisor 500+ Posts
    MPC 2051 Jams one or two times ONLY in the morning

    Elmo's Avatar
    Join Date
    Feb 2010
    Location
    up north
    Posts
    535
    Rep Power
    41

    Re: MPC 2051 Jams one or two times ONLY in the morning

    The paper had just reached the fuser but had not been gripped by the belt and roller
    I Used To Live To Fix Things Now i Fix Things To Live

  7. #7
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    648
    Rep Power
    42

    Re: MPC 2051 Jams one or two times ONLY in the morning

    Yes, but i find the paper immediately after the registry roller... Not close to the fuser..

    Inviato dal mio SM-G935F utilizzando Tapatalk
    Memento Audere Semper

  8. #8
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    648
    Rep Power
    42

    Re: MPC 2051 Jams one or two times ONLY in the morning

    The fuser unit works without grinding noise or other

    Inviato dal mio SM-G935F utilizzando Tapatalk
    Memento Audere Semper

  9. #9
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    940
    Rep Power
    47

    Re: MPC 2051 Jams one or two times ONLY in the morning

    Hi there!
    Yep, the timing-motor. Had a similar issue some years ago on a MPC 2800, the first 2-3 duplex prints/copies jammed, customer removes paper, machine running. Next day the same. The solution was a new duplex-motor.
    Greetings...

  10. #10
    Field Supervisor 500+ Posts Codex's Avatar
    Join Date
    May 2008
    Location
    Sicily
    Posts
    648
    Rep Power
    42

    Re: MPC 2051 Jams one or two times ONLY in the morning

    I checked the jam location... It's j019

    Inviato dal mio SM-G935F utilizzando Tapatalk
    Memento Audere Semper

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here