A3 double click - MPc 8002 and Pro c5100

[Timmytronic]

Hi, Does anyone know how to change the A3 double click on the MPc 8002 and Proc 5100 range machines. I have three machines in one place and one is double clicking and two are not. The customer is aware of this, they don't do a lot of A3's anyway but I wanted to switch it off the one machine and can't see it in the manual or in the SP mode. It use to be in SP 5 on older machine with you holding down a key when you went into the mode but I can't seem to do it on these types now.

Thanks for any help

Tim

[Brianneoe]

SP mode 5104-001 should be set as a 1. That is the default value from the factory. It is also noted that this does not apply to the bypass operation.

Good luck