Thanks:
0
Dislikes:
0
-
A3 double click - MPc 8002 and Pro c5100
Hi, Does anyone know how to change the A3 double click on the MPc 8002 and Proc 5100 range machines. I have three machines in one place and one is double clicking and two are not. The customer is aware of this, they don't do a lot of A3's anyway but I wanted to switch it off the one machine and can't see it in the manual or in the SP mode. It use to be in SP 5 on older machine with you holding down a key when you went into the mode but I can't seem to do it on these types now.
Thanks for any help
Tim
-
Re: A3 double click - MPc 8002 and Pro c5100
SP mode 5104-001 should be set as a 1. That is the default value from the factory. It is also noted that this does not apply to the bypass operation.
Good luck
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks