Ricoh C3002 with Poor Photo Print Quality

[afterhours]

Hello everyone,

I can use some help. I have 2 C3002 Ricohs one with 63K and one with 93K and both of them have very bad photo quality prints, photos come out very pixeled looking. I can use the same digital photo and print it on Konica minolta c552 with 1.5M or c6500 with 3.5M and the image comes out very crisp. Is there a special setting im missing or a special driver I should use. Please help.

Thank you,
Emmanuel

[NeoMatrix]

Try not to use the word "PRINT" in your title, as CTN shows the post in print view mode only.
Nobody is able to reply to your thread.

Edit your post Title and remove the word "Print" or misspell it like "PRN"

[copier tech]

You managed to reply, oh & so did I !

What driver are you using? does the Ricoh photocopy OK?

[tavorh]

I have similar issue with mpc4502. Copy is ok, but print is very bad. Driver is PCL6.

Regards,
Roman

[afterhours]

You managed to reply, oh & so did I !

What driver are you using? does the Ricoh photocopy OK?

Im using PCL6 also I tried a couple universal drivers all from Ricoh. Are there any solutions?

[afterhours]

Try not to use the word "PRINT" in your title, as CTN shows the post in print view mode only.
Nobody is able to reply to your thread.

Edit your post Title and remove the word "Print" or misspell it like "PRN"

How do i edit the title?

[NeoMatrix]

How do i edit the title?

You have ~20 or so hours to edit,update,delete any of your own posts, before CTN software makes it permanent.
Once it's made permanent you cannot edit any personal posts.

Depends on which CTN editor settings you are using to do your posting with.
I use the settings Full Editor (WYSIWYG) as shown at the bottom of the editor HTML page.

Find the below by clicking your "Settings" at the top right of your CTN home page. Then click "General Settings" lower down in the left menu bar.

------------------------ insert ------------------------------
Miscellaneous Options

Message Editor Interface:

• Enhanced Interface - Full WYSIWYG Editing
• Basic Editor - A simple text box
• Standard Editor - Extra formatting controls

When posting messages to the forums or other members, there are three interface types available to you. The simplest of these is a simple text box, while the last is a fully-fledged WYSIWYG editor, which allows you to format your text as you want it and see the results immediately.

Depending upon the capabilities of your web browser, you may not be able to use all of these options. If you experience problems when posting messages, try switching to a different interface type.
--------------------------------------- end ---------------------------