Thanks:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 0
RICOH MP 2852 (JAM 052)
Hi friends, I would like to know if anyone has had this problem.
Jam 052, just happens on tray two. The registration clutch stays, and stops spinning.
From the tray one all there is no problem the registration clutch will be nine normally.
-
Re: RICOH MP 2852 (JAM 052)
Where does the paper stop?
-
Re: RICOH MP 2852 (JAM 052)
J 52 is a trail edge jam from tray 2. Check that paper size is set correctly.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: RICOH MP 2852 (JAM 052)
Thanks for the answers.
Tray 2 is set correctly.
The paper jam is over, passing the transfer roller.
Attached images
-
Re: RICOH MP 2852 (JAM 052)
From SP mode do an input check on all the relevant sensors, especially those relating to tray 2
Does it feed OK from tray 4?
-
Re: RICOH MP 2852 (JAM 052)
since you say tray is set properly then could be transfer roller or paper feed clutch is not disengaging.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: RICOH MP 2852 (JAM 052)
Hello friends .
I have changed registry cloucht and solved the problem.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks