Results 1 to 5 of 5
  1. #1
    copierman 250+ Posts
    Mp c6502 shredding fuse belts


    Join Date
    Aug 2007
    Location
    not specified
    Posts
    485
    Rep Power
    40

    Mp c6502 shredding fuse belts

    Hi all,

    I have Mp c6502 that has in the past month ripped up 2 fuser belts. Has anyone else had this. I was going to order the stripper plate as that's the only part in contact with the belt. The plate is over £400 so I wanted to ask if anyone else has had this issue before I place an order.
    Networking skills are advantageous but use of a 3m vacuum cleaner is essential

  2. #2
    Retired 10,000+ Posts
    Mp c6502 shredding fuse belts

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: Mp c6502 shredding fuse belts

    Replace everything that the PM table says needs to be replaced at the same time as the belt.

  3. #3
    Junior Member
    Join Date
    Oct 2016
    Posts
    6
    Rep Power
    0

    Re: Mp c6502 shredding fuse belts

    There is a service bulletin dealing with torn fusing belts.

  4. #4
    copierman 250+ Posts
    Mp c6502 shredding fuse belts


    Join Date
    Aug 2007
    Location
    not specified
    Posts
    485
    Rep Power
    40

    Re: Mp c6502 shredding fuse belts

    Quote Originally Posted by Onomono View Post
    There is a service bulletin dealing with torn fusing belts.
    I have just had a look through the bulletins and cannot find anything, what is the bulletin number? its ok i have found the bulletin and have already changed the heating roller.
    Networking skills are advantageous but use of a 3m vacuum cleaner is essential

  5. #5
    copierman 250+ Posts
    Mp c6502 shredding fuse belts


    Join Date
    Aug 2007
    Location
    not specified
    Posts
    485
    Rep Power
    40

    Re: Mp c6502 shredding fuse belts

    Quote Originally Posted by slimslob View Post
    Replace everything that the PM table says needs to be replaced at the same time as the belt.
    I have done this, including new style heating roller bushings.
    Networking skills are advantageous but use of a 3m vacuum cleaner is essential

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here