Ricoh AFICIO SPC232SF get error wrong model after change in special sp mode
need help please thanks
Ricoh AFICIO SPC232SF get error wrong model after change in special sp mode
need help please thanks
Start from the beginning,
(1) What was the initial fault/problem with the machine?
(2) What EXACTLY did you do in special SP mode?
(3) What have you tried since.?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
If you can no longer get into SP mode to change back what ever you have changed, you are going to have to replace at least the EEPROM on the Engine board and possibly the Engine board. Worse case scenario, you will need to replace the EEPROM, engine board and controller board. Looks like trying to fix the original problem yourself is going to cost you a lot more that calling a qualified tech would have.
looks like you change serial number. You can try to go back in special mode and enter # of copier
4.1 SERVICE MENU
4.1.1 OVERVIEW
This model has several service menus. Each service menu has several adjustment items.
This section explains how to enter each service menu and what you can do in each service
menu.
Each menu is classified into two "Modes" depending on how you enter the service menus.
"Menu Mode" can be executed by depressing the following key sequence while in ready
condition:
Clear/Stop, 1, 0, 7 and Color Start. (Press and hold each key till a beep is heard.)
"Special Mode" is needed to input the serial number after the Engine Board EEPROM
has been replaced. Please contact your Technical Service Manager for details.
Each menu is classified as follows:
Menu Mode Function
Maintenance Mode Menu This is a menu for maintenance and service.
Special Mode This mode is used to input the serial number.
Fax Service Test Menu This is a menu for checking the fax mode
Bookmarks