Originally Posted by
aschmold
I have been struggling with this issue since machine installed. Currently at about 300k total. Whenever a gradient is printed that transitions from dark to light it is fine until just befor it turns white. At this point on the image a distinct line or step is produced. Turning smoothing on in fiery driver helps issue a bit, but now a mottling effect appears. It does this on all colors. Have replaced IPU sub IPU CNTL BCU and IOB. Have recalibrated laser, swapped out the Fiery with a different one. All patches on fiery set to auto update and all appear to be up to date. Firmware on machine at newest levels. Any ideas?
Bookmarks