Results 1 to 8 of 8

Thread: SC 672 - 11

  1. #1
    Junior Member
    Join Date
    Feb 2017
    Location
    wrexham
    Posts
    7
    Rep Power
    0

    SC 672 - 11

    I have a new MP C307, it has given the error code SC 672 - 11. It says its the communication between the ops panel and board. I have swapped the panel and still throws this error. Before i replace the board has anyone had this error or can help me out.

  2. #2
    Junior Member
    Join Date
    Feb 2017
    Location
    wrexham
    Posts
    7
    Rep Power
    0

    Re: SC 672 - 11

    Yes i have checked the dip switches...looks like i'm going to have to change the board.....thank you

  3. #3
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: SC 672 - 11

    If it's a fax model, the MBU jumper being OFF can also cause this code.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

  4. #4
    Retired 10,000+ Posts
    SC 672 - 11

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,131
    Rep Power
    989

    Re: SC 672 - 11

    I have seen the USB cable between the Op panel and the controller board cause problems.

  5. #5
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45

    Re: SC 672 - 11

    Quote Originally Posted by slimslob View Post
    I have seen the USB cable between the Op panel and the controller board cause problems.
    Had one just now where some genius had uplugged the USB cable from the board, and sure enough SC670-11 popped up right away!
    Press the GREEN button!!

  6. #6
    Technician
    Join Date
    Jun 2019
    Location
    Orange
    Posts
    18
    Rep Power
    10

    Re: SC 672 - 11

    Quote Originally Posted by slimslob View Post
    I have seen the USB cable between the Op panel and the controller board cause problems.
    Does anyone know the part number for that USB cable?? I rather not remove it from another machine if I don't have too.

  7. #7
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45

    Re: SC 672 - 11

    Quote Originally Posted by monstercopier View Post
    Does anyone know the part number for that USB cable?? I rather not remove it from another machine if I don't have too.
    You can try D2965247. Found it on the point to point diagram. No reference in the parts manuaul.
    Press the GREEN button!!

  8. #8
    Technician
    Join Date
    Feb 2020
    Location
    Cagliari, Sardinia
    Posts
    22
    Rep Power
    9

    Re: SC 672 - 11

    Quote Originally Posted by lloydy83 View Post
    I have a new MP C307, it has given the error code SC 672 - 11. It says its the communication between the ops panel and board. I have swapped the panel and still throws this error. Before i replace the board has anyone had this error or can help me out.

    I had the same error code in a MPC3003. You can find the solution by following this post:
    Ethernet error + SC672-11 with new NVRAM on Ricoh MPC3003

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here