Ricoh MP2001 - LEFT & RIGHT SIDE TO LIGHT COPY

[zed255]

Dusty environment? You may have dust collecting on the polygon mirror and other optical components inside. These laser units are not well sealed from the environment.

[khattab.al.masry]

Check the transfer roller that at its position or not

تم الإرسال من SM-J700H باستخدام Tapatalk

[StephenB]

Make sure you are using Ricoh OEM drum # B039-9510. The generic drums I have tried when rebuilding MP 2000's, etc, do not work in this system.

[rnc_ebm]

did you replace the charge roller ?

not yet.

just clean the laser shield glass, what have you got to lose. especially since that should have been your first step.

okay i'll try today


br

RNC_EBM
Philippines

[rnc_ebm]

Check the transfer roller that at its position or not

تم الإرسال من SM-J700H باستخدام Tapatalk

already cleaned & checked.

Make sure you are using Ricoh OEM drum # B039-9510. The generic drums I have tried when rebuilding MP 2000's, etc, do not work in this system.

it's all original parts, and I've tried already OEM/GENERIC but it's same problem that's why I've put again the ORIG. parts.



today, i'll try again what was other mentioned here that I did not do.




br

RNC_EBM
Philippines

[rnc_ebm]

here are the sample copies

Ricoh MP2001 E365M550080.jpgRicoh MP2001 E365M550128.jpg


br

RNC_EBM

[davel]

Always replace at same time drum, dev, cleaning blade, charge roller and cleaning roller.

[rnc_ebm]

just clean the laser shield glass, what have you got to lose. especially since that should have been your first step.

DONE, ALL ARE OKAY NOW , THANK YOU VERY MUCH.


br

RNC_EBM
Philippines

[daran]

Already CLEANED PCU, Changed developer & drum and still same problem.

anyone encountered this problem, anyone can share it ?



br

RNC_EBM

[FONT=Arial][/FONT]
Clean the scanner lens.

[davel]

Anything in the scanner will only affect copies or scans.