Thanks:
0
Likes:
0
Dislikes:
0
-
ricoh 1045 sc690
now my machine tells me when i open it code error sc690 please help me and tell me what is the problem and how to make it
i know from the manual that it is bicu i dont know what is it and where please tell me and i tryto make it
-
Copier Technician
250+ Posts
- Rep Power
- 34
This means an error is detected in the GAVD communication I2C control register of the GABIC2. The I2C bus on BICU is probably defective. Unless you are into board level repairs, it looks like you might need to replace the BICU.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Looks like you will be ordering a new board there bud.
-
Service Manager
250+ Posts
- Rep Power
- 37
I've seen this fault before when the ribbon cable to the laser ass. has been refitted upside down.If the laser has been removed immediately before this error I would check that.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks