Gestetner 3222 : How to access service menu?

[xtraez]

I know, I'll burn in hell. Just don't want to see a cust completely knacker their machine and then have to pay a fortune to get it repaired, better safe than sorry!

Oooh crap, just realised what you meant by cruel lol

Press the YELLOW key

Type in 1 0 7

Press and hold the RED key

When the machine beeps and says "copy SP" press 1

Then press 2, then #

Type in 801 then #

Press confirm / execute / something like that - might ask for a 1 to be put in

That will get rid of the "replace PCU" message.

Press exit until you come out of SP modes. Sorted!

DON'T DO ANYTHING ELSE!!!!!!

Ooo... Thanx TonerMunkeh.... thanks for the guidance... but.. there is problem.. i don't find any menu on 801, machine have 802.

Please guide me furhter.... thanks.

[xtraez]

A new PCU will automatically reset the message unless someone fiddled with the drum before intalling it. There is a drive tab on the back of the PCU which contacts a push button in the rear of the cavity. If the message did NOT reset on its own with a new PCU, then you may have reinstalled the old unit, or the unit you received may have not been new. Did you remove the red tapes from the front of the PCU, and the black paper from the drum surface? If you didn't have to do that, then the PCU was definitely NOT new. I always leave the tapes in until after the PCU is in the copier frame to avoid confusing the new and old.

Thanx b003ace.... it happen due to the drive at behind of the PCU is not at the correct position, manually i push it up, and install the drum unit...

Tadaaa..... there are no more error...

Thanks a lot friends and guru..

Thanks a lot.....

[johncenna]

any one can tell me ?? i have problem with my machine .. small words cant good copy and if writing is light then nothing will print on the page and page will comes white..


Picture.jpgPicture 001.jpg

plz watch both of them then u will easily know the problem.

rply me on this
ali.jara14@gmail.com

[slimslob]

any one can tell me ?? i have problem with my machine .. small words cant good copy and if writing is light then nothing will print on the page and page will comes white..


Picture.jpgPicture 001.jpg

plz watch both of them then u will easily know the problem.

rply me on this
ali.jara14@gmail.com

I would advise that you start a new thread instead of hijacking a six year old thread. Be sure to include the model and a description of what you have tried.

[ruben]

any one can tell me ?? i have problem with my machine .. small words cant good copy and if writing is light then nothing will print on the page and page will comes white..


Picture.jpgPicture 001.jpg

plz watch both of them then u will easily know the problem.

rply me on this
ali.jara14@gmail.com

Hire a qualified engineer.