6502 dog ears

[geordie40]

As someone said before, check the foam rollers after the fuser, I have had them get flat spots which caused jams/dog ears

[Alear]

Issue is resolved. It was the inverter assembly. We swapped it out. Believe the motor has an issue.

[mavetherave311]

had this on 2 models,our problem was the duplex locating lever on the front of the duplex unit,loosen and push duplex in so there is no play,on our copiers,the duplex bounced out by about a centimeter

[mlandry71]

Check TSB129. There have been at least 6 modifications/part updates of the exit/inverter unit. Some major changes to roller widths, guides and mylars.

Modifications applied to the Exit Unit
Modification
No Old P/N New P/N Description Q’ty Int Purpose When
1 D1367002 D1357009 PAPER EXIT UNIT: ASS'Y
1 1
For higher
reliability against
Jam30/75
Oct 2013


2 D1367003 1 1
For higher
reliability against
Roller marks
Dec 2013

3 D1367004 1 1
For higher
durability of the
Exit bracket
Jun 2014

4 D1357006 1 1
For higher
reliability against
Exit Jam 75
Jun 2014

5 D1357007 1 1
For higher
durability of the
Exit shaft
Jul 2014

6 D1357008 1 1
To prevent
interference
between the
guide plates and
idle rollers
Nov 2014

[Imprestik]

Part has been superseded to D1357019 now