Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 6502 dog ears

  1. #1
    Technician
    Join Date
    May 2017
    Location
    Indiana
    Posts
    12
    Post Thanks / Like
    Rep Power
    1

    6502 dog ears

    Has anyone run into this. It only happens when duplexing. Have swapped the duplex/paper exit unit. No resolve. The entire duplex path is clear of obstructions. Mylars show no damage. Any ideas? Thanks.


  2. #2
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    725
    Post Thanks / Like
    Rep Power
    12

    Re: 6502 dog ears

    Quote Originally Posted by Alear View Post
    Has anyone run into this. It only happens when duplexing. Have swapped the duplex/paper exit unit. No resolve. The entire duplex path is clear of obstructions. Mylars show no damage. Any ideas? Thanks.

    check the fuser


  3. #3
    Trusted Tech 50+ Posts trc's Avatar
    Join Date
    Jan 2007
    Posts
    81
    Post Thanks / Like
    Rep Power
    22

    Re: 6502 dog ears

    Could be pressure roller...


  4. #4
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    725
    Post Thanks / Like
    Rep Power
    12

    Re: 6502 dog ears

    pay close attention to the fuser inlet plate .. there could me toner build up causing this


  5. #5
    Technician
    Join Date
    May 2017
    Location
    Indiana
    Posts
    12
    Post Thanks / Like
    Rep Power
    1
    Eliminated fuser, registration, paper exit assy.


  6. #6
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    725
    Post Thanks / Like
    Rep Power
    12

    Re: 6502 dog ears

    Quote Originally Posted by Alear View Post
    Eliminated fuser, registration, paper exit assy.
    well then you need to examine the duplex path again. it can only be so many spots for this to occur in.


  7. #7
    Technician
    Join Date
    May 2017
    Location
    Indiana
    Posts
    12
    Post Thanks / Like
    Rep Power
    1
    I don't think it's happening before the fuser because the dog ear is not creased.


  8. #8
    Field Supervisor 500+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    725
    Post Thanks / Like
    Rep Power
    12

    Re: 6502 dog ears

    Quote Originally Posted by Alear View Post
    I don't think it's happening before the fuser because the dog ear is not creased.
    a fuser issue doesn't have to crease the paper it can bend a corner causing a " dog ear". but it could be in the " turn around" section of the duplex path


  9. #9
    Technician
    Join Date
    Jul 2015
    Posts
    39
    Post Thanks / Like
    Rep Power
    5

    Re: 6502 dog ears

    Check the foam rollers at exit .


  10. #10
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    446
    Post Thanks / Like
    Rep Power
    15

    Re: 6502 dog ears

    I have had this once on a mp6001 - from 2,5 million prints on - never could solve it!
    Even not Ricoh tech's.
    Customer was so frustrated he bought an other brand.
    Tried everything to, from fuser parts to exit units...
    But... here's one for you: I have noticed that without the rear cover, the jams and the dog ears were less frequent.
    Be sure that the fan filters are all clean, otherwise you get build up moisture.
    Perhaps it is a problem with moisture???


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here