C2503 PM supplies

[tinfox]

I'm doing my first drum developer replacement.

I see there is no developer material packet available, so I'm assuming when ordering D1773020 that it will contain black developer?

The other drums/devs are near there pm limits. Is there a kit that will have all the drums and developer units?

Thanks!

[copier tech]

PM life is 60k for the PCU & 120K for the developers.

Personally I replace the black PCU & dev as a set, the dev units are pretty poor compared to the MPC3003 series.

Dev unit comes with developer in the unit.

PCU (all for the same) D1882254

K Dev unit D1773025

[tinfox]

PM life is 60k for the PCU & 120K for the developers.

Personally I replace the black PCU & dev as a set, the dev units are pretty poor compared to the MPC3003 series.

Dev unit comes with developer in the unit.

Great Thanks!

So I need to order the four separate developers and four drums? The drums are the same?

[copier tech]

Great Thanks!

So I need to order the four separate developers and four drums? The drums are the same?

Yes that is correct.

[slimslob]

Great Thanks!

So I need to order the four separate developers and four drums? The drums are the same?

Are all four PCDU beyond PM count? If not, only replace those that are.

[tinfox]

Are all four PCDU beyond PM count? If not, only replace those that are.

No just the black, but the others are very close.

[Mark Bbb]

If you replace only developer or pcu, you look at a bunch of work!
Just did that previous moth, parts are expensive, which much time on PM interventions needed!
As mentioned, PM's for c3003 (-2, -1) are much better...

[sturmtrooper]

If you replace only developer or pcu, you look at a bunch of work!
Just did that previous moth, parts are expensive, which much time on PM interventions needed!
As mentioned, PM's for c3003 (-2, -1) are much better...

Sadly these are low end budget models. I'm really hoping the replacement C2004/2504 are better but won't hold my breath.

Are all four PCDU beyond PM count? If not, only replace those that are.

Our shop mostly only replaces color parts when the quality goes bad, unless they are far far beyond PM count. Seems to work ok.