Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    459
    Rep Power
    15

    c300 ARDF sqeaking noise when feeding in.

    This is the only c300 we have in field.
    When performing DF output check, feed motor forward (and reverse) comes without noise.
    So, I presume the noise is provoked by the reverse belt or feed roller.
    Thank you for helping!
    Greetings,
    Mark


  2. #2
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,184
    Rep Power
    42

    Re: c300 ARDF sqeaking noise when feeding in.

    Have you checked the friction pad underneath the feed unit? If it is smooth it should be replaced.


  3. #3
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    459
    Rep Power
    15

    Re: c300 ARDF sqeaking noise when feeding in.

    Quote Originally Posted by ruben View Post
    Have you checked the friction pad underneath the feed unit? If it is smooth it should be replaced.
    Ruben: it's what it is, it feels like rubber, but it's bleu, probably ink from ball pens.
    It works fine, there are no problem with jams or so...
    I will replace the rollers and fric belt...
    Probably that will solve the issue?


  4. #4
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,184
    Rep Power
    42

    Re: c300 ARDF sqeaking noise when feeding in.

    Quote Originally Posted by Mark Bbb View Post
    Ruben: it's what it is, it feels like rubber, but it's bleu, probably ink from ball pens.
    It works fine, there are no problem with jams or so...
    I will replace the rollers and fric belt...
    Probably that will solve the issue?
    If it's blue then it is worn, I believe the colouring is from the pickup roller transfering onto the friction pad. No need to replace the pickup roller, unless the DF has done an extraordinary amount of feeds.

    DF noises are usually caused by worn pickup or reverse parts, very rarely are they caused by bushings or motors.


  5. #5
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    459
    Rep Power
    15

    Re: c300 ARDF sqeaking noise when feeding in.

    Ruben: it was solved with (or by?) replacing all the rollers and the friction path.
    Thanks again.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here