Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Mpc3500 calibration result

    The results of mpc3500 calibration, anyone can help what is the problem? Thank you very much for your advice.



    Sent from my Mi 4i using Tapatalk

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Re: Mpc3500 calibration result

    Quote Originally Posted by lawchatkui View Post
    The results of mpc3500 calibration, anyone can help what is the problem? Thank you very much for your advice.



    Sent from my Mi 4i using Tapatalk


    Sent from my Mi 4i using Tapatalk

  3. #3
    copierman 250+ Posts
    Mpc3500 calibration result


    Join Date
    Aug 2007
    Location
    not specified
    Posts
    485
    Rep Power
    40

    Re: Mpc3500 calibration result

    Quote Originally Posted by lawchatkui View Post


    Sent from my Mi 4i using Tapatalk

    I would check transfer roller casing as it's happening on
    all colours. It also looks one side is more worse than the other. Either the transfer case pegs have been damaged or the 2 guides that the case slides into are cracked.
    Networking skills are advantageous but use of a 3m vacuum cleaner is essential

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Re: Mpc3500 calibration result

    Ok thank you, by the way could it be the cause of transfer belt unit uneven movement?

    Sent from my Mi 4i using Tapatalk

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Jan 2013
    Posts
    219
    Rep Power
    25

    Re: Mpc3500 calibration result

    Check your fuser, that both spring loaded levers are present, the ones that push the pressure roller when the door is closed, one might be broken off/missing. Check the transfer roller position guides, below the fuser, they have a tendancy to break on the 4500's.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Re: Mpc3500 calibration result

    Mpc3500 calibration result Mpc3500 calibration result

    Sent from my Mi 4i using Tapatalk

  7. #7
    Service Manager 1,000+ Posts
    Mpc3500 calibration result

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    2,161
    Rep Power
    101

    Re: Mpc3500 calibration result

    My question to you... what have you done to correct this issue? Are the drum and developing units OEM and within maintenance interval or past due? Are the toners OEM? Is the transfer roller within maintenance interval or past due? We need to deduct before we can diagnose..... copier repair 101.

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Re: Mpc3500 calibration result

    Quote Originally Posted by copiertec View Post
    My question to you... what have you done to correct this issue? Are the drum and developing units OEM and within maintenance interval or past due? Are the toners OEM? Is the transfer roller within maintenance interval or past due? We need to deduct before we can diagnose..... copier repair 101.
    Pro, it's true the machine with 3 years life in customer place & just change the OEm developer & toner as mentioned by the dealer, vacuum clean all the pcu & DV tank, use the Fuji drum set. But it often accumulated the waste toner in PCU & throw out lots of toner beside the toner entrance of DV tank around 6-7k copies

    Sent from my Mi 4i using Tapatalk

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Re: Mpc3500 calibration result

    I just hv to vacuum out all the stuck waste toner & copies turns perfect.

    Sent from my Mi 4i using Tapatalk

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Rep Power
    14

    Re: Mpc3500 calibration result

    Change the entrance & both side seal as well, & I can't find out where is the leakage the waste toner left on Dv tank at the side of toner entrance.

    Sent from my Mi 4i using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here