The results of mpc3500 calibration, anyone can help what is the problem? Thank you very much for your advice.
Sent from my Mi 4i using Tapatalk
The results of mpc3500 calibration, anyone can help what is the problem? Thank you very much for your advice.
Sent from my Mi 4i using Tapatalk
Networking skills are advantageous but use of a 3m vacuum cleaner is essential
Ok thank you, by the way could it be the cause of transfer belt unit uneven movement?
Sent from my Mi 4i using Tapatalk
Check your fuser, that both spring loaded levers are present, the ones that push the pressure roller when the door is closed, one might be broken off/missing. Check the transfer roller position guides, below the fuser, they have a tendancy to break on the 4500's.
Sent from my Mi 4i using Tapatalk
My question to you... what have you done to correct this issue? Are the drum and developing units OEM and within maintenance interval or past due? Are the toners OEM? Is the transfer roller within maintenance interval or past due? We need to deduct before we can diagnose..... copier repair 101.
Pro, it's true the machine with 3 years life in customer place & just change the OEm developer & toner as mentioned by the dealer, vacuum clean all the pcu & DV tank, use the Fuji drum set. But it often accumulated the waste toner in PCU & throw out lots of toner beside the toner entrance of DV tank around 6-7k copies
Sent from my Mi 4i using Tapatalk
I just hv to vacuum out all the stuck waste toner & copies turns perfect.
Sent from my Mi 4i using Tapatalk
Change the entrance & both side seal as well, & I can't find out where is the leakage the waste toner left on Dv tank at the side of toner entrance.
Sent from my Mi 4i using Tapatalk
Bookmarks