Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts Qball's Avatar
    Join Date
    Jun 2013
    Location
    Plainfield, IL
    Posts
    62
    Post Thanks / Like
    Rep Power
    9

    MP 3554 fuser life

    Just curious to know what you guys are doing when you get the end of life for the fuser belt on this series. I have on that just popped and, I gotta tell ya, this fusing belt still looks great. I'm tempted to clear the counter and see what it will realistically go before failure.


    Sent from my iPhone using Tapatalk


  2. #2
    Service Manager 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,623
    Post Thanks / Like
    Rep Power
    144

    Re: MP 3554 fuser life

    Just remember that the PM of PM Tables stands for Preventive Maintenance. The idea is to replace components before they cause customer complaints.


  3. #3
    Trusted Tech 50+ Posts Qball's Avatar
    Join Date
    Jun 2013
    Location
    Plainfield, IL
    Posts
    62
    Post Thanks / Like
    Rep Power
    9

    Re: MP 3554 fuser life

    Quote Originally Posted by slimslob View Post
    Just remember that the PM of PM Tables stands for Preventive Maintenance. The idea is to replace components before they cause customer complaints.
    Yeah, I get that. But how many of us actually replace the hot roller of a MP 5000 on the 160k pm cycle when it will really go up to a million?

    If a fusing belt will go 500k (just laying that out for argument's sake) it seems nonsensical to replace it at 240k.


    Sent from my iPhone using Tapatalk


  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2017
    Posts
    79
    Post Thanks / Like
    Rep Power
    1

    Re: MP 3554 fuser life

    Yeah I never followed the pm guide line & found out that most of the consumables are up to 3 or times life span as compared to pm cycle, (really not much problem though) like I change the upper roller while the surface scratch & throw a dirty on copies.
    I practice fully utilised & save green concept. Haha

    Sent from my Mi 4i using Tapatalk


  5. #5
    Copier Combobulator 250+ Posts
    Join Date
    May 2016
    Posts
    306
    Post Thanks / Like
    Rep Power
    8

    Re: MP 3554 fuser life

    Quote Originally Posted by Qball View Post
    Yeah, I get that. But how many of us actually replace the hot roller of a MP 5000 on the 160k pm cycle when it will really go up to a million?

    If a fusing belt will go 500k (just laying that out for argument's sake) it seems nonsensical to replace it at 240k.


    Sent from my iPhone using Tapatalk
    Something to keep in mind is that the older hot rollers were solid aluminum with a non stick coating, and would generally work until the coating peeled off and started leaving marks on the paper.

    These new heating sleeves are thinner than beer cans and when they fail they tend to shred. So instead of a customer with a machine that works but leaves some marks you have a machine that is completely down until you can get there with the parts to fix it.

    So you have to weigh the cost savings vs angry customers. I wouldn't be surprised if you could get an extra 10 or 20% life out of them, especially at locations where they are used in longer runs vs many short runs.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here