mp6500 paper jam during photocopy after recover it become like that see attachment

[fbkhan3]

where exactly paper jams,Under the Drum?


Try to open back cover of the Machine and see if the Drum drive gear is Slip on shaft or have become loose.



Regard's

[hsh6049]

Whow, that looks nasty. I would hazard a guess, and try the charge power pack or the developer bias power pack

hi andy it was transfer power pack cause it replace new one... thank your very much and very appreciate it.

but unfortunately it happen again, last week replace new developer type 24 initialize 2801 everything good vsg 4 (new compatible drum) vsp 0.4
but after running about few thousand noticed vsp reading keep on going up and initialize 2962 ..vsp reading going down....continue running and check back reading of vsp going up again.

check on developing magnectic roller conditions it looks like cover up with toner more than developer ..magnetic roller damage or developer gone? pour out and service developer thank and put it back reading became vsg5.0 vsp 5.0