Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Senior Tech 250+ Posts fbkhan3's Avatar
    Join Date
    May 2012
    Posts
    302
    Rep Power
    15

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    where exactly paper jams,Under the Drum?


    Try to open back cover of the Machine and see if the Drum drive gear is Slip on shaft or have become loose.



    Regard's


  2. #12
    Technician
    Join Date
    Jul 2012
    Location
    sarawak
    Posts
    40
    Rep Power
    0

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Quote Originally Posted by andy227 View Post
    Whow, that looks nasty. I would hazard a guess, and try the charge power pack or the developer bias power pack
    hi andy it was transfer power pack cause it replace new one... thank your very much and very appreciate it.

    but unfortunately it happen again, last week replace new developer type 24 initialize 2801 everything good vsg 4 (new compatible drum) vsp 0.4
    but after running about few thousand noticed vsp reading keep on going up and initialize 2962 ..vsp reading going down....continue running and check back reading of vsp going up again.

    check on developing magnectic roller conditions it looks like cover up with toner more than developer ..magnetic roller damage or developer gone? pour out and service developer thank and put it back reading became vsg5.0 vsp 5.0


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here