Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Technician
    Join Date
    Jul 2012
    Location
    sarawak
    Posts
    35
    Post Thanks / Like
    Rep Power
    0

    mp6500 paper jam during photocopy after recover it become like that see attachment

    replace corona wire , front & rear end block wire mesh still same
    inspect on developer tank major cleaning pour out developer filtering still same
    clean transfer unit and drum module still same
    any ideas how to solve it?

    IMG_20170812_175246.jpg


  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jan 2013
    Posts
    173
    Post Thanks / Like
    Rep Power
    11

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Whow, that looks nasty. I would hazard a guess, and try the charge power pack or the developer bias power pack


  3. #3
    Technician
    Join Date
    Jul 2012
    Location
    sarawak
    Posts
    35
    Post Thanks / Like
    Rep Power
    0

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Wht.is the charge power pack or the developer bias power pack?
    Do u mean change the bias in sp mode


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jan 2013
    Posts
    173
    Post Thanks / Like
    Rep Power
    11

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    The small PCB units behind the copier that give high voltage charge to the coronna, and another to the dev roller. And while you are back there, have another charge corona receptable to hand as its convinient to change at that point.


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    155
    Post Thanks / Like
    Rep Power
    14

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    My guess is wrong toner, clean out entire toner system dev unit and pcu/toner recycle. New dev and correct toner, good luck and charge the custoner for putting in wrong toner.


  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jan 2013
    Posts
    173
    Post Thanks / Like
    Rep Power
    11

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    My guess is wrong toner
    No way, sorry have to disagree, and sending him down the wrong path. No.1 you cannot put the wrong toner, nothing else will fit there , unless customer physically opens the toner bottle and opens a different other and pours it in, would make a hell of a mess, cannot see it happening and the tech would know about it, also, you would get a copy but very very heavy toner background.
    It is what I described before, plus the fact it went into paper jam mode at the same time indicates the same. Getting him to change developer, and toner is an expensive guess. Swap out the power packs from another machine, and IF that proves not to be the case, then, swap over the complete developer unit from another machine to see if it is developer/toner at fault.


  7. #7
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    155
    Post Thanks / Like
    Rep Power
    14

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Let us hope that the poster lets us know the end fix but it looks to me that incompatible toner is causing negative image.


  8. #8
    Service Manager 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,618
    Post Thanks / Like
    Rep Power
    143

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Quote Originally Posted by davel View Post
    My guess is wrong toner, clean out entire toner system dev unit and pcu/toner recycle. New dev and correct toner, good luck and charge the custoner for putting in wrong toner.
    Bad drum shaft ground. B0651137 drum shaft bracket.


  9. #9
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    2,523
    Post Thanks / Like
    Rep Power
    64

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Quote Originally Posted by davel View Post
    My guess is wrong toner, clean out entire toner system dev unit and pcu/toner recycle. New dev and correct toner, good luck and charge the custoner for putting in wrong toner.
    Had a customer do exactly that. The admin at a hospital put an MP5000 toner into MP6000/6001 (because "they run out of MP6000 toner").
    The MP5000 toner bottle does not fit securely into the MP6000. What a heck of a mess.
    I cleaned up split toner throughout the entire machine for over an hour.

    I didn't do the bean counting(money figures )for that cleanup job so I don't know what our office charged for the entire cleanup bill.

    Fun fun fun....

    What if we could count the stars... , what number would you stop at...?"
    [Exchange manual acquisitions, PM's CTN members only. ]
    [] |N | | o | M | Δ | t | π | | x | []

  10. #10
    Technician
    Join Date
    Jul 2012
    Location
    sarawak
    Posts
    35
    Post Thanks / Like
    Rep Power
    0

    Re: mp6500 paper jam during photocopy after recover it become like that see attachme

    Thanks guys..will try my best to solve it..once successful will let u guys know...the purpose
    Of this forum sharing eAch experience on settle different issues


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here