Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    489
    Rep Power
    16

    mpc300 ADF pick up roller stays down

    Hoi,
    Immediate after closing the ADF cover the pick up roller goes up, but falls down again, thus blocking the originals to properly being placed on the original feed table.
    It worked fine until I replaced the pick- and feed rollers.
    What did I do wrong?
    this is the only info I have from the serv. man.:
    4. Slide the shaft [A], and then remove the feed roller [B].

    So I'm hoping for your help.
    Thank you in advance.
    Greetings,
    Mark


  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,066
    Rep Power
    152

    Re: mpc300 ADF pick up roller stays down

    You got something back together wrong.


  3. #3
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    489
    Rep Power
    16

    Re: mpc300 ADF pick up roller stays down

    Quote Originally Posted by slimslob View Post
    You got something back together wrong.
    Slimslob: yes that is so. It is difficult to re-assemble the pick and feed unit, the holding-pin needs to be at the right spot and together you need to give a twist at a bushing... No info in serv.man. ...
    Waiting for someone who could give some more info.
    Thanks anyway.


  4. #4
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    489
    Rep Power
    16

    Re: mpc300 ADF pick up roller stays down

    anyone, please?


  5. #5
    Trusted Tech 50+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Frankfurt am Main
    Posts
    85
    Rep Power
    2

    Re: mpc300 ADF pick up roller stays down

    These are pictures from a mp c305 df. See and check if everything on the right place.
    When the df cover open and closed the paper feed unit gets a quick drive to move up the pickup roller.

    Attached Files Attached Files

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    489
    Rep Power
    16

    Re: mpc300 ADF pick up roller stays down

    Quote Originally Posted by aktasson View Post
    These are pictures from a mp c305 df. See and check if everything on the right place.
    When the df cover open and closed the paper feed unit gets a quick drive to move up the pickup roller.
    Aktasson: thank you for your quick reply. I notice that there is great difference between the c300 and c305. But thanks anyway.
    Anyone else, please?


  7. #7
    Trusted Tech 50+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Frankfurt am Main
    Posts
    85
    Rep Power
    2

    Re: mpc300 ADF pick up roller stays down

    Quote Originally Posted by Mark Bbb View Post
    Aktasson: thank you for your quick reply. I notice that there is great difference between the c300 and c305. But thanks anyway.
    Anyone else, please?
    I know it's just not the same but similar to the stella/griffin df. Maybe the df has problem with the torque limiter pickup?
    I have attached training documents, maybe help with the troubleshooting.

    Attached Files Attached Files

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here