Results 1 to 10 of 10
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Nov 2013
    Posts
    84
    Rep Power
    21

    MPC 5503 with SC 665-02

    Hello,

    i have a allmost brandnew MPC 5503 who comes with a SC 665-02 right in the Start-Up-Procedure.

    In the Manual the Code means a Connection Failure between the BCU and the Picture IOB.

    I changed the BCU without success.

    Anybody has an Idea ?

    Cheers
    Roger

  2. #2
    Service Manager 10,000+ Posts
    MPC 5503  with SC 665-02

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: MPC 5503 with SC 665-02

    Quote Originally Posted by Roger67 View Post
    Hello,

    i have a allmost brandnew MPC 5503 who comes with a SC 665-02 right in the Start-Up-Procedure.

    In the Manual the Code means a Connection Failure between the BCU and the Picture IOB.

    I changed the BCU without success.

    Anybody has an Idea ?

    Cheers
    Roger
    I find when I have issues like that, reseating ALL connections of both PWB's helps.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: MPC 5503 with SC 665-02

    if it is a new machine as you mentioned, Ricoh needs to take his responsibility and help you out.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Nov 2013
    Posts
    84
    Rep Power
    21

    Re: MPC 5503 with SC 665-02

    Hi Folks,

    so i changed the IPU,BCU,EEPROM,IOB and the Harness between the BCU and IOB Board.

    I still have the SC 665-02.When i go in to the SC Mode,everything Comes in Japanese oder Chinese
    Languages.

    Puuuuhhhhh......
    Cheers
    Roger

  5. #5
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: MPC 5503 with SC 665-02

    Does it have lower paper trays or an LCT? If so, take the machine off it / them and try again.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

  6. #6
    Service Manager 5,000+ Posts
    MPC 5503  with SC 665-02

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: MPC 5503 with SC 665-02

    You could have an issue with the NVRam.

    Have you tried flashing ALL the firmware?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  7. #7
    Senior Tech 250+ Posts tufbnme's Avatar
    Join Date
    Feb 2008
    Location
    BUILD THE WALL! State
    Posts
    489
    Rep Power
    38

    Re: MPC 5503 with SC 665-02

    Bulletin from Ricoh, hope it helps
    rfg059249.pdf

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Nov 2013
    Posts
    84
    Rep Power
    21

    Re: MPC 5503 with SC 665-02

    Hello Folks,

    thanks for your Help,but i still have the same Problem.

    When i pull out the Toner Cartriges i can update the Firmware and can enter the Service Mode.
    In this stage ( Toner is out ) when i put the Toner in, the Maschine cant recognize the Cartriges.
    When i restart the Maschine,with the Cartriges pullt IN , i get the SC665-02 again !

    Do you think the Problem is in the 4 ID Chips Board,or maybe the controll-Unit of them ? ( each of this ID-Chips are located at the front of the Toner cartriges,right ? )

    This is realy strange !

    Cheers
    Roger

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Nov 2013
    Posts
    84
    Rep Power
    21

    Re: MPC 5503 with SC 665-02

    Folks,

    Wonder Happens............

    I changed all the Toner Cartridges and now....the Maschine runs well !!!!!!!

    I dont no why,but it seems that maybe all the Toner Cartridges have some wrong informations on the Chip.

    Now i am checking this Baby......it runs well.

    Thanks for your Input

    Cheers
    Roger

  10. #10
    Copier Combobulator 500+ Posts
    Join Date
    May 2016
    Posts
    589
    Rep Power
    26

    Re: MPC 5503 with SC 665-02

    Quote Originally Posted by Roger67 View Post
    Folks,

    Wonder Happens............

    I changed all the Toner Cartridges and now....the Maschine runs well !!!!!!!

    I dont no why,but it seems that maybe all the Toner Cartridges have some wrong informations on the Chip.

    Now i am checking this Baby......it runs well.

    Thanks for your Input

    Cheers
    Roger
    My guess is that one or all of the toner bottles had bad RFID chips. Or maybe the machine damaged them. If this problem repeats you may have to look at the RFID sensor board on the machine.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here