Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Service Manager 5,000+ Posts
    SPC830 Fuser Unit in an MPC5502

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    SPC830 Fuser Unit in an MPC5502

    Quick question i've been fitting the SPC830DN Transfer Belt Unit to the MPC5502 (This unit is a lot cheaper than the belt & cleaning unit)

    My question is has anyone tried fitting the SPC830DN fuser unit to the MPC5502 ?
    As again the complete 830 fuser is a lot cheaper than the 5502 sleeve & film.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  2. #2
    Copier Combobulator 500+ Posts
    Join Date
    May 2016
    Posts
    589
    Rep Power
    26

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by copier tech View Post
    Quick question i've been fitting the SPC830DN Transfer Belt Unit to the MPC5502 (This unit is a lot cheaper than the belt & cleaning unit)

    My question is has anyone tried fitting the SPC830DN fuser unit to the MPC5502 ?
    As again the complete 830 fuser is a lot cheaper than the 5502 sleeve & film.
    MP C 3502 and SP C 830 Fusing units

  3. #3
    Service Manager 5,000+ Posts
    SPC830 Fuser Unit in an MPC5502

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by sturmtrooper View Post
    Thanks for steering me in the right direction! 😘
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  4. #4
    Senior Tech 250+ Posts
    Join Date
    Aug 2012
    Posts
    276
    Rep Power
    28

    Re: SPC830 Fuser Unit in an MPC5502

    Just a bit of a update on this.

    Only use the fuser maintenance kit of the 4502/5502's

    Do not use them on the 3002/3502's.

    Fusing lamps are different and will cause SC553 on a 3002/3502, while it will work to start off with it wont last long....

  5. #5
    Service Manager 5,000+ Posts
    SPC830 Fuser Unit in an MPC5502

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by Imprestik View Post
    Just a bit of a update on this.

    Only use the fuser maintenance kit of the 4502/5502's

    Do not use them on the 3002/3502's.

    Fusing lamps are different and will cause SC553 on a 3002/3502, while it will work to start off with it wont last long....
    Thanks for the update, which kot do you use for the MPC3002/4502?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  6. #6
    Service Manager 5,000+ Posts
    SPC830 Fuser Unit in an MPC5502

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by copier tech View Post
    Thanks for the update, which kot do you use for the MPC3002/4502?


    My colleague recently fitted the SPC830N fuser kit 407097​ to an MPC5502 & so far no issues, maybe because we use 220v it is compatible?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  7. #7
    Junior Member
    Join Date
    Feb 2022
    Location
    Mexicali B.C.
    Posts
    4
    Rep Power
    0

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by copier tech View Post


    My colleague recently fitted the SPC830N fuser kit 407097​ to an MPC5502 & so far no issues, maybe because we use 220v it is compatible?
    The fuser unit on an SP c830DN wears out quickly using 100 lb (300g) paper in my experience from 20 to 30,000 copies. MP c5502 fuser, should I expect the same life time?
    My SP C830DN printer at less than 100,000 copies has three fuser blown. Where can I buy the fuser band, which is the only thing I need to change?

  8. #8
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    2,316
    Rep Power
    86

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by Manuel V View Post
    The fuser unit on an SP c830DN wears out quickly using 100 lb (300g) paper in my experience from 20 to 30,000 copies. MP c5502 fuser, should I expect the same life time?
    My SP C830DN printer at less than 100,000 copies has three fuser blown. Where can I buy the fuser band, which is the only thing I need to change?
    Kind of all fusers using a sleeve on a static core don't like high amounts of thick paper, especially if you feed it SEF. You can buy the sleeve from katun I guess - I tried that once and it worken but didn't bother again.

  9. #9
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: SPC830 Fuser Unit in an MPC5502

    Quote Originally Posted by Manuel V View Post
    The fuser unit on an SP c830DN wears out quickly using 100 lb (300g) paper in my experience from 20 to 30,000 copies. MP c5502 fuser, should I expect the same life time?
    My SP C830DN printer at less than 100,000 copies has three fuser blown. Where can I buy the fuser band, which is the only thing I need to change?

    You must change more than the FUSER BAND>>>i think you mean fuser sleave.
    there is a cotton lubricating pad that attaches with a lot of small screws.
    You need the sleave,the cotton lub pad and the high temp oil or greas,whatever they call it.
    I would also change the gears on the side.
    pressure roller needs to be checked too.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here