Quote Originally Posted by raveendrala View Post
Yes It is recondition machine it was memory clear by sale person can u let me know how to do a manual line position, forces line position end with out error
You will have to change values in SP 2101. The original values would be on the birth certificate. If you do not have the birth certificate, it then becomes a trial and error adjustment. Since the yellow is the farthest out, start with it. Change the Y Main Scan Dot. Print the color test pattern. Check which way the yellow has moved. Repeat using different values until the yellow moves in the correct direction. If changing the main scan dot moves the yellow along the wrong axis, work with the sub scan dot. Once the yellow is close, repeat for cyan and magenta. Once all three are close, run forced line position to finalize.