Results 1 to 4 of 4
  1. #1
    Multibrands Tech 250+ Posts rapidocument's Avatar
    Join Date
    Jul 2012
    Location
    Los Angeles, CA.
    Posts
    263
    Rep Power
    14

    Ricoh Aficio MP1600 SC543 But fuser is OK

    Hello everybody

    This machine came back to the shop after 1 month, back then was serviced and drum and developer were changed, everything fine, but now it comes back with a SC543 error,
    I tested with another working fuser and still the same error,

    I Checked all LVPS fuses and they┐re OK.
    I ran the SP810 but when i push Print (the command is 0=no 1=yes reset, when I put 1+Start the display says Error !!!
    I'm about to throw a rock to this one
    (taking into account that is a warranty work) !!

    Any opinions are welcomed, thanks.

    Last edited by rapidocument; 08-28-2017 at 06:32 PM. Reason: syntax

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jun 2009
    Location
    /Florida
    Posts
    237
    Rep Power
    20

    Re: Ricoh Aficio MP1600 SC543 But fuser is OK

    try this leave rt side door open then reset code turn off and back on with rt side door open. Should say door is open if it clear code properly. now cheat interlock switches and see if fuser heats up and says ready.

    SC Code Reset
    5810 1
    Resets all level-A service call conditions, such as fusing errors. If the reset is
    successful, the display shows "Completed." If the reset fails, an error message
    shows.


  3. #3
    Senior Tech 1,000+ Posts
    Ricoh Aficio MP1600 SC543 But fuser is OK

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    1,935
    Rep Power
    48

    Re: Ricoh Aficio MP1600 SC543 But fuser is OK

    IF the thermistors and thermostats check OK, you may be looking at a power supply replacement.

    NEVER ASSUME ANYTHING

  4. #4
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,074
    Rep Power
    152

    Re: Ricoh Aficio MP1600 SC543 But fuser is OK

    You could have a wire harness problem.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here