MP C2003SP

[copier tech]

To reiterate my previous post, the machine does not have the usage to justify a production machine or even a 60-65 ppm model.

No an MPC2003 to a pro series is not necessary, but say an MPC4503 would be an ideal replacement.

[slimslob]

No an MPC2003 to a pro series is not necessary, but say an MPC4503 would be an ideal replacement.

Still depends on actual average monthly volume. Target color ratio is the same.

[Polo-022]

Machine installed three years ago, but it usually works ocassionally, on summer time.
Well, today i found a slight(?) difference between the value that is given/written on Yellow pcu from manuf.
and the value registered at SP 2-005-0238. In other words, instead of "-29", value registered was "-27".
I remembered pcu replacement was done under user pressure : "i want to print", "i want to scan" and
i didn't notice a pale background of yellow, in color prints only.
By changing the value and opening my eyes as much as i could, i believe that case is closed.
Thanks again for your very helpfull suggestions, all of you!

[copier tech]

Still depends on actual average monthly volume. Target color ratio is the same.

Yeah but a more durable machine with longer PM parts life.