Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Mar 2014
    Columbia, SC
    Rep Power

    RICOH Aficio MP C3500 Error Code SC 443

    So was replacing the toner pumps from bad toner problem.
    I left a toner pump wire hanging and when i replace the transfer unit
    the connection caught the wire and cut both blue wires.
    and I got ERROR CODE SC443
    So i completed the pump replacements and secured my wires properly.
    I turned the copier on but SC443 came up again on the screen
    I clean the id sensor by sliding the door
    and the error code is still there.
    I removed the id sensors and cleaned them
    still no luck. I swapped out transfer unit same thing.
    all the round silver spinning motors on the back spin on copier start up.
    please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    How do I reset error code SC 443? and do you think that's the problem.
    Last edited by ISLEVIBES; 08-29-2017 at 10:54 PM.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here