Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 21
RICOH Aficio MP C3500 Error Code SC 443
So was replacing the toner pumps from bad toner problem.
I left a toner pump wire hanging and when i replace the transfer unit
the connection caught the wire and cut both blue wires.
and I got ERROR CODE SC443
So i completed the pump replacements and secured my wires properly.
I turned the copier on but SC443 came up again on the screen
I clean the id sensor by sliding the door
and the error code is still there.
I removed the id sensors and cleaned them
still no luck. I swapped out transfer unit same thing.
all the round silver spinning motors on the back spin on copier start up.
please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How do I reset error code SC 443? and do you think that's the problem.
Last edited by ISLEVIBES; 08-29-2017 at 10:54 PM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks