20170829_184759.jpg20170829_184814.jpg20170829_184750.jpg20170829_184759.jpg20170829_184814.jpg20170829_184750.jpg

We use a Ricoh Pro c900 and it is strange how we have found the oil application unit roller (for the third time) ..... the rubber coating on the edges is gone ... there are small pieces of rubber all over the fuser. Only the right and left sides have worn out, the center has all the covering.
According to the manual, we have the springs (silver and black) in the correct places. Does anyone know why this happens? It is the third that has happened this and the Oil application unit is not cheap !.
We use the ref D0164480, the last modification part we know.
Thank you very much