Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Ricoh SP 5200s (M052) Constant "Add Paper"
Hey Everyone. Has anyone seen this before?
We have a customer who installed a Maintenance Kit that included the fusing unit and feed rollers ect... Since then, all 3 of the optional trays are in a constant "add paper" state. It looks like they installed everything correctly. I tested all of the sensors with input check and they check out fine except the trays don't seem to raise enough to trigger the Paper End Sensors.
I can't see inside the tray area to tell what is preventing the paper from raising all of the way up.
-
Re: Ricoh SP 5200s (M052) Constant "Add Paper"
My customers break the out of paper sensors all the time but I doubt yours have broken all 3!
Does it feed from bypas?
Try lifting the machine offthe paper back & reseat.
-
Junior Member
- Rep Power
- 0
Re: Ricoh SP 5200s (M052) Constant "Add Paper"
Yes the bypass and the 1st tray works.
-
Re: Ricoh SP 5200s (M052) Constant "Add Paper"
Lift the machine off the paper bank check the connection block.
Updating the fw may help.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks