Results 1 to 6 of 6

Thread: Mp4054

  1. #1
    Junior Member
    Join Date
    Aug 2016
    Location
    Durban
    Posts
    1
    Rep Power
    0

    Mp4054

    Hi i have a mp4054 that was up for pm changed drum ,dev ,blade after 2 weeks the prints became very light. Did a rtb that was out for adjustment of vsg and vsp still nothing. Changed the TD sensor it worked for about 4 months and now the prints are light again anyone else have the same or similar problem.


  2. #2
    Trusted Tech 50+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Frankfurt am Main
    Posts
    80
    Rep Power
    2

    Re: Mp4054

    After replacing of pcu/dv the developer initalization was executed?
    Did you try forced toner supply in sp? And how was the result of printout?
    Does the toner bottle rotate (toner bottle motor) in outup check?
    I use the whole pcdu D2020125 when the pm counter it allows. The cost advantage of the component parts is not so high (in Germany round about 60). But you save a lot of time.


  3. #3
    Field Service Engineer 1,000+ Posts
    Mp4054

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,241
    Rep Power
    40

    Re: Mp4054

    You say it lasted 4 months but how many prints had been done in that time? 100? 100,000?

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  4. #4
    Senior Tech 100+ Posts
    Mp4054


    Join Date
    Jul 2011
    Location
    sevilla
    Posts
    119
    Rep Power
    0

    Re: Mp4054

    If what others have advised you, such as checking the toner motor, toner hopper, initial developer and drum setting and have already done it, I would tell you to clean the magnetic roller and every streak of it.


    on several occasions something similar to your problem has happened to me and this has solved


  5. #5
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    182
    Rep Power
    15

    Re: Mp4054

    Did you initialise the dev, what about charge roller and cleaner?


  6. #6
    Field Supervisor 500+ Posts
    Mp4054

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    828
    Rep Power
    27

    Re: Mp4054

    Quote Originally Posted by lejaunek@motswako.biz View Post
    Hi i have a mp4054 that was up for pm changed drum ,dev ,blade after 2 weeks the prints became very light. Did a rtb that was out for adjustment of vsg and vsp still nothing. Changed the TD sensor it worked for about 4 months and now the prints are light again anyone else have the same or similar problem.
    You did the right thing by changing SP3-629-001 (Vc Vsp) to 530 SP3-629-101 (Vb Vsp) to 330
    Was there any improvment after you did that procedure?

    Did you follow the proper procedure by going into service mode before you changed the developer? That model only initializes properly if you set the SP code for developer replacement before you replace the developer.
    Before replacing the developer, set the setting of SP3-701-024 to “1” before turning off the main power. After replacing the developer, turn the machine back on and developer will be properly adjusted.

    Last edited by blazebusiness; 09-22-2017 at 02:38 AM.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here