this one keeps going light, i can force toner and it will come back but it goes light after a big run and stays light. ideas appreciated.
this one keeps going light, i can force toner and it will come back but it goes light after a big run and stays light. ideas appreciated.
what are your values for vsg and vsp?
Totoro
If all the needed maintenance has been done and that happens on that model you could try:
set it to turn on the ID sensor every 30 copies.
SP2507-01 to 1 and SP2507-02 to 30
That's assuming the machine doesn't need a PM and the developer is not way past due to be replaced
Also could be the start of a failing toner supply motor (hopper) or toner pump
Last edited by blazebusiness; 09-27-2017 at 03:59 PM.
Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com
Bookmarks