Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Service Manager 1,000+ Posts
    Mpc4502 fax install trouble

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Mpc4502 fax install trouble

    Brand new fax kit installed and machine hangs at Please Wait. If we remove it then machine boots just fine.

    any ideas?

  2. #2
    Service Manager 1,000+ Posts
    Mpc4502 fax install trouble

    Lagonda's Avatar
    Join Date
    Aug 2008
    Location
    Brisbane
    Posts
    1,650
    Rep Power
    71

    Re: Mpc4502 fax install trouble

    Quote Originally Posted by mrfuser View Post
    Brand new fax kit installed and machine hangs at Please Wait. If we remove it then machine boots just fine.

    any ideas?
    I cant remember if a '02 fax had a separate MBU board piggybacked on the FCU as they used to cause trouble if it wasn't seated firmly. Also check that the battery jumper is set to ON.
    At least 50% of IT is a solution looking for a problem.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    8
    Rep Power
    0

    Re: Mpc4502 fax install trouble

    have you activated battery?

    check also contact are ok.

  4. #4
    Service Manager 1,000+ Posts
    Mpc4502 fax install trouble

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4502 fax install trouble

    Does anyone know which jumper works for the battery it says nothing about that on install guide

  5. #5
    Senior Tech 250+ Posts DRichard's Avatar
    Join Date
    May 2008
    Location
    Knoxville, TN
    Posts
    482
    Rep Power
    43

    Re: Mpc4502 fax install trouble

    Quote Originally Posted by mrfuser View Post
    Brand new fax kit installed and machine hangs at Please Wait. If we remove it then machine boots just fine.

    any ideas?
    If jumper is set and connectors are all securely seated, FCU is the likely culprit. Unusual but not unheard of.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    Buffalo, NY
    Posts
    227
    Rep Power
    32

    Re: Mpc4502 fax install trouble

    Its the jumper next to the batteries. If you look close you can see an off and on on the pcb

  7. #7
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: Mpc4502 fax install trouble

    Quote Originally Posted by mrfuser View Post
    Does anyone know which jumper works for the battery it says nothing about that on install guide
    Item 4 of the installation procedure.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here