Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Service Manager 1,000+ Posts
    Mpc4500 fine line duplex only

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Mpc4500 fine line duplex only

    Lead edge about 1/4 inch in a fine line going op to non op direction. Any ideas? Tried adjust in service mode and nothing changes doing lead edge and such.

  2. #2
    Senior Tech 250+ Posts DRichard's Avatar
    Join Date
    May 2008
    Location
    Knoxville, TN
    Posts
    482
    Rep Power
    43

    Re: Mpc4500 fine line duplex only

    Quote Originally Posted by mrfuser View Post
    Lead edge about 1/4 inch in a fine line going op to non op direction. Any ideas? Tried adjust in service mode and nothing changes doing lead edge and such.
    Side two margin(s) in user tools set to zero?

  3. #3
    Service Manager 1,000+ Posts
    Mpc4500 fine line duplex only

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,557
    Rep Power
    51

    Re: Mpc4500 fine line duplex only

    Yep already checked


    Quote Originally Posted by DRichard View Post
    Side two margin(s) in user tools set to zero?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here