Hello,
Uneven image density with all colors (copy and prints). Any idea's?
counter color 27K and black 42K.
Machine was transported (in a good way) and machine has functioned ok before.
We don't now how printouts were before it came in our office.
Hello,
Uneven image density with all colors (copy and prints). Any idea's?
counter color 27K and black 42K.
Machine was transported (in a good way) and machine has functioned ok before.
We don't now how printouts were before it came in our office.
Hi there!
Take a close look at the ptr. Had it 2 times, that the pressure-lever (with spring) was not in the correct position.
Hope this helps.
Greetings...
Try cleaning the laser glass.
Zeldaman, this i will do shortly, because after cleaning the laser unit (and polygon's) problem still exists...
Funny thing is that, when duplexing, the second printed side on that (same) paper has a better saturation.
But... that could be because when duplexing the second side, the transfer current is higher...
So, i will inform you all shortly...
The spring of the paper transfer roller was in the good position.
Replaced the paper transfer roller with a new one, no good...
Other F.U., no good.
We have now the same problem on a c3501... Cleaned the laser shield glas and polygon M.'s, no good...
Even tried Ricoh paper from a new package, no good.
The only thing i can see is ITB. But with 69K that's a little early, is n't it?
Hi there!
Yes, itīs a littlbit early. But there was a RTB about breaking / loose wireīs in the ITB-unit. Itīs worth a try.
Greetings...
Bookmarks