Thanks:
0
Likes:
0
Dislikes:
0
-
MP C8002
Hi all...
Sometimes, usually after machine is not used for some time yellow background stripe appearson printed area, about 60mm wide, from lead edge. All PM parts are 140K.
test1.pdf
Last edited by bat; 10-30-2017 at 12:04 PM.
-
Senior Tech
250+ Posts
- Rep Power
- 36
Re: MP C8002
we have had a few drum potential sensors go down on these machines I had one doing a similar thing with yellow background.
there is an sp to test the sensor but its just as easy too swop it with another one in the machine the sensor only costs about £50.00
so is worth a try.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks