Thanks: 
Likes: Has anybody encounter this error before
Sent from my SM-G955U using Tapatalk
Dislikes: 0
Has anybody encounter this error before
Sent from my SM-G955U using Tapatalk
I.T.B. Lift motor p/n D1361212
There is a bulletin on this. The worm gear on the tiny lift motor cracks and stops working. Change the lift motor. D1361212 Real pain in the rear getting to the motor too.
Originally Posted by jtymabel
Here is the technical bulletin
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Thanks the bulletin, the photo taken recently from MPC8002, and motor 8 wires connector. the bulletin see the motor has 2 wires connector.
want to know what's difference. Thanks
Last edited by peterxu256; 05-22-2019 at 04:39 PM. Reason: insert
That bulletin is for the itb lift motor and there is only two wires on that motet it should be a worm gear motor.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Failed to att@ch the photos. My motor just from the machine, have 8 wire connector, don't know why.
You are looking at the wrong motor. The lift motor is not mounted on the ITB assembly. If you search the part number in the parts catalog you will find it is part of the main drive.
+1 on this. I've had one go bad on me, and it was quite involved swapping the motor out. Don't skip ANY steps in the service manual... follow them closely. It'll be less painful.
Resize the attachment of the motor photo. it is indeed mounted at rear side , Part # clearly says AX060460
8 wire motor.jpg
Reply With Quote
Bookmarks