Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 21
Mp2550 not fusing properly
Mp2550 during copying the pressure roller and the hot roller just separate due to pressure roller bearing rings out of positions. the fusing frame is not broken . any help please ?
-
Re: Mp2550 not fusing properly
The pressure roll is pretty much held in place with the spring on the inner side of the bearing and presses against the metal tabs in the fuser. Is the spring in the right position and are the tabs in good shape?
-
Re: Mp2550 not fusing properly
Yo might have to replace the fusing unit lower case.
-
Re: Mp2550 not fusing properly
Make sure you have the correct press roller, had a 1027 (similar) do that to me last week.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks