Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Apr 2014
    Location
    harare
    Posts
    16
    Rep Power
    10

    Mp2550 not fusing properly

    Mp2550 during copying the pressure roller and the hot roller just separate due to pressure roller bearing rings out of positions. the fusing frame is not broken . any help please ?


  2. #2
    Field Supervisor 500+ Posts
    Mp2550 not fusing properly

    totoro's Avatar
    Join Date
    Apr 2008
    Posts
    553
    Rep Power
    29

    Re: Mp2550 not fusing properly

    The pressure roll is pretty much held in place with the spring on the inner side of the bearing and presses against the metal tabs in the fuser. Is the spring in the right position and are the tabs in good shape?

    Totoro

  3. #3
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    8,528
    Rep Power
    185

    Re: Mp2550 not fusing properly

    Yo might have to replace the fusing unit lower case.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Aug 2015
    Location
    Orange City, FL
    Posts
    137
    Rep Power
    8

    Re: Mp2550 not fusing properly

    Make sure you have the correct press roller, had a 1027 (similar) do that to me last week.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here